...belt in a case sold by Pentax which just fits. It's sort of like the Altoid tin, but is leather and fits the S4i better. By the way, there is no way to crank up the brightness of the S4i LCD monitor. ...
Question about 1989 LeSabre
belt, oil change and cleaned the throttle body. I also replaced the ignition control module because all the jelly had leaked out of it and when this problem originated, it only occured when the engine
...belt. Can't tell.) Also while checking it out, a small brass pin fell out. Was not sure if this is the problem or not. I will post a picture as soon as this posts. Would appreciate any suggestions. ...
...belt from the motor to the transition gear on mine has disintegrated. Might as well change both. Sears parts says they no longer have these in stock. any hope or do i lave a rather large paperweight. ...
belt is unbuckled after the initial transition to ON, the chime does not sound. Headlamps On Warning The radio activates the headlamps on warning as requested by the body control module (BCM). The BCM
2 volts). There could be a similar sensor for the crank as well so the computer knows what position each is in and therefore if the fixed relationship between the two changes such as occurs when
Question about 1998 Golf
...change the theft deterrent arm/disarm mode: 6.1. Insert the key in the left front, right front, or liftgate door lock cylinder. 6.2. Rotate the key from the center to the unlock position. 6.3. Press ...
...change that trend lets get rich> no? *a 500k mile ALT" no no no, 12vdc is noT charging ever, 13-15vdc is charging and 99% of DIY never read the service manual step 1. remove NEG battery lug first ...
...transit, when I start van and Feb 2, 2022 I bought a used 2016 ford connect transit in 2018. I've had Aug 8, 2023 2013 ford transit connect. Good battery, changed alternator Aug 10, 2021 More results ...
Usually answered in minutes!
1,383 Questions
1,133 Questions
959 Questions
944 Questions
808 Questions