Question about Grand WEGA KF42WE610 42" Rear Projection HDTV-Ready Television
...Sony TV, lamp was changed 8 months ago, and now TV keeps turning off after a few hours, what can the issue be? Lamp Fan. or Ballast Board. for part number and prices call Encompass Parts ...
...hearing clickings sound too?The board call Ballast board also dead.This Ballast board help to ignite the projection lamp.If a power supply board problems,only power light LED indication will
...board and or the ballast boards. If it is caused by the ballast boards, it should give you error code with the red stand-by light blinking 11 or 13 times. If the stand-by light does not blink a code, ...
Question about KDS-R60XBR1 60" Projection HDTV
ballast. If you haven't changed the bulb before It could probably use one anyway, and you could keep the old for a spare. Here are some more from sony on this. According to Sony: Red LED Flashing four
...require changing,after changing the projection lamp stilll have clicking noises.The board that call the Ballast board is also dead too.The Ballast board only job to ignite the projection
...Ballast board should be replace too.The Ballast board only job are to ignite the tv projection lamp.If the tv projection lamp it an old lamp been in the tv like 1 1/2 or 2 years already.The tv ...
...change the tv projection lamp wright?Yes,than this is not a power supply board problems.This problems it is the board that call the Ballast board is not igniting the tv projection lamp.This Ballast ...
Question about Grand WEGA KF60WE610 60" Rear Projection Television
...lamp might have to be replacement change too,because,when the Ballast board has died and exploded the voltages and current high voltages could have more than the tv projection lamp now could
Question about KP-57XBR10 57" Rear Projection Television
ballast board first. If this help you, there is no need ot replace the lamp. Picture of the ballast included here for you to compare. If replacing the ballast dis not help you, change the lamp too. OK
Question about KP-57XBR10 57" Rear Projection Television
...DLP projection TV and it comes on stays on for about a minute then it cuts off I just changed the bulb about a month ago Look for a bad ballast board. This board connects directly to the lamp
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions