Questions & Answers for: change 24 hr display

...change the clock to 24-hour format: 1. Press and hold the CANCEL and Delay pads for three seconds. 2. Press the More+ or Less - pad to select 12 or 24 hour. Clock The clock can be set to display time ...

...24-HR reading. Push the MODE button to get to the hour/minute/second/year/mo-day/month/day value you want to change. Push the ST/SP button to increase the value, the RESET button to reduce the

24 How can I change between 12 hour and 24 hour time on my Sangean PR-D3L? Archer, I have read the entire PR-3DL manual and there appears no mention of a 12/24 hr setting, unlike certain other Sangean

...menu, choose 'change preferences' and go through menu until you find option 'set clock', choose this and set the correct time, you can also choose a 12 hr or 24 hr format. Please remember to rate ...

...change from 24-hour mode to 12-hour mode, hold the "UP" button for 3 seconds. First you have to get it in the "Time Mode" by:Press and hold MODE button for 3 sec. It is in the Time Mode when the hour ...

...change the clock from 12 hour time to 24 hour time Setting the Time Press and hold the HR or MN buttons for two seconds. Then press and hold HR until the correct hour appears on the display. AM or PM ...

cant change time dnx690hd cant change 24 hr clock to 12 Tap where the time is displayed. It toggles 12/24 hr

the 24 hour display. I want to change it to read only in the 12 hour display. How can I do this. Does the manual show how to do this? Some clocks of this type have a 12/24 selection switch on the back

...change to the 24-hour military time clock. The display will show 24 hr. If this is the choice you want, press the START pad. Press the CLOCK pad again to black out the clock display. The display will ...

SHARP model SPC711 .How do you change display from 24 hr. to 12 hr. mode? Google (sharp)(SPC711)(manual) without parens for instructions.