Questions & Answers for: Harley Davidson FLSTF Fat boy chain noise

Question about 1993 FLSTF Fat boy

2 Answers

...on HARLEY DAVIDSON I am considering changing the final drive on my '95 Fatboy from Belt Drive to Chain and Sprocket after having to replace the belt AGAIN after snapping it twice in 20,000km. What ...

Ad

Question about 2003 FLSTF Fat boy

1 Answer

...chain tensioners were not problematic after 2001...or so. It could be, but can you give a little more detail i.e. RPM range, gear, where noise is coming frm, when the noise occurs. Like under full ...

Ad

My primary chain /clutch cover has no o ring, but has a flat gasket.Do I need an o ring also? The flat gasket is the new "replacement" gasket for the O-ring. But, to tell the truth, I run both the ...

Question about 2000 FLSTF Fat boy

1 Answer

...of the outer primary cover. Inside you will see a nut. Loosen the nut and you can raise the primary chain adjuster to tighten the chain or lower it to loosen it. Use your finger to gauge the tension ...

...noise like there is a chain loose inside. It does not effect the performance so I am thinking it is the drive between the engine and transmission may be loose. Would this be the cause? It sounds like ...

Question about 2000 FLSTF Fat boy

0 Answer

...chain noise primary chain noise Hi Anonymous, for more information about your question please visit the websites below. Good luck and have nice day. How To Adjust The Primary Chain On Harley Davidson ...

Question about 2000 FLSTF Fat boy

1 Answer

...is straight before i tighten 'er down? Before removing old transmission, check that rear belt/chain is running true. Install new transmission in frame, and sight down rear chain/belt ...

Question about 1993 FLSTF Fat boy

0 Answer

...hearitage Hi Anonymous, there is 4, engine oil 3 qts with filter, transmission 20-24 oz., primary chain case 30-36 oz. and front forks 11.5 oz. wet and 12.5 oz. dry. Good ...

Question about 2003 FLSTF Fat boy

1 Answer

Back brakes First time owner Noise in the back putting on brakes What kind of noise??? A light squeal or more of a grinding \noise???? Check the brake pad friction material condition and height from ...

1980kz750gtwinltd how are intake and exhaust camshaft correctly set on chain tdc number 1 then fit cams so all valves are closed on that cylinder , check marks on cam cogs and should line up !

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...