Questions & Answers for: ceramic stove top problems

ceramic top stove. The large element seems to cut in and out it takes forever to boil a pot of water. We have bought new cookware made specifically for ceramic top stoves but the large burner gives us

...ceramic top electric stove door problem i purchased a kenmore ceramic top electric stove and the door will not completely close. the inside light stays on and im losing heat. I TOOK OFF THE DOOR AND ...

Ceramic top stove. There is problem with the 1200watt element. Goes on but the temp control does not work. Stays hot , Simpson model 900 series. Seriel No C28751, C28294. I have a replacement element.

...but I'm not sure where to start! Its probably the switch for that element, the contacts are fused. If this is a smooth top ceramic stove then the control relay board relay for that element is

ceramic cooktop on my frigidaire slide in stove cracked my stove top and would like to replace it . no instructions came with the replacement part. there is no need of any instruction booklet for your

ceramic top electric stove and one of the burners quit getting hot. what could be the problem It is a kenmore glass top stove about18 years old. One of the burners stop working just wondering if I can

...ceramic cooktop. It started making a "popping noise" and there was a burned smell, but the stove was not on. I had to turn off the breaker to stop this. Either there's ashort in the stove top or the ...

...stove top burner stopped working I have a ceramic front top, the front right big burner was working perfectly and just stopped all of a sudden? How do I fix it without having to buy a new stove. ...

...ceramic stove top only goes on "HI", cannot control it to lower settings. It seems to happen when the larger burner is used and eventually heats to it highest setting even whe Dual purpose burner on ...

ceramic stove top suddenly coming on when ONLY the inner ring is in use? Does this indicate a problem? Unhappy about the extra energy that is being used when only the inner ring is needed. New problem