Questions & Answers for: centering washing machine barrel

Washing Machine trouble The inside barrel, or what ever it is called, keeps jerking really hard when its done with a cycle. It practically moves the washer itself and sometime when it is filling up, ...

...washing. I make sure that the load is balanced, the machine is level. When the wash starts going the barrel gets off set to the right (always) and it makes a grinding type of noise. When I open the ...

barrel fills up but does not empty barrel fills up but does not discharge water kenmore washer Barrel -ok, your tub is full of water, check the lid switch. If it is not the problem you will have to ...

the barrel came detatched from the top and won't drain the water Best off to call a certified Service Center such as Sears.

...machine and swings forward and back. Clothes are still very wet after final spin. the rear struts have come loose and need re tension this will cause the barrel to come loose due to the barrel not ...

...washing-agitation part of the cycle. Is there a switch which is mal-fuctioning? Sounds to me like the pump is not operating up to par. Open the machine and check all the drain lines form the tub to ...

...washing cycle is engaged, the spin cycle starts but stops suddenly as the barrel begins to accelerate. Error message to contact service center. Attempted a spin cycle on it's own with a few ...

...barrel of my Kenmore Elite HE 3t is out of balance with every load (washing or spinning). It appears the drum is sagging downwards in the rear of the drum, and it squeaks on every rotation. Also its ...

...washing mechines they have to take force wieght and you need to stay on top of the small problems because the big problems are vary expensive just for parts . If you can take it apart little sheet ...

...will not fit between the barrel rest in back of cabinet and holes do not align properly to allow for instillation of top shelve! Apparently this question is not abut a washing machine of any ...