Questions & Answers for: ceiling fan light popped working

...ceiling fan. removed old fan and found 3 white and 3 black wires, plus grounds. Cannot figure out how to connect the unit up. breaker controls all ceiling lights in master bath,2nd bath,and all three ...

...ceiling fan with light kit (Model number 191-691). I was missing the nut that secures the bottom globe. I got a replacement nut, but while putting the globe back on, something popped in or around the ...

...a ceiling fan not to work. Here it is: http://yourhandymanzone.com/Your_Handyman_Zone_How_To_Pages_Home_Improvement_Zone_Cooling_Ventilation_Systems_Ceiling_Fan_Does_Not_Work.htm Hope this helps! ...

...fan unit, and get a visual of the control module pcb.  If it looks repairable, have at 'er.  If it looks real bad, replacement may be your best ...

ceiling fan with mind of its own I have just one fan in my room and the lights and fan will turn off and on by themslves when the power source is on, especially when fan is on high and the light is ...

...ceiling fan model 761-567. Lights are not working. I have 123 volts at the light sockets but the 40w bulbs are very dim. Sometimes the lights will not come on at all. I'm having the same issue, ...

We heard a loud pop & now the lights won't work. Tried new bulbs & nothing. Can we order/buy a new light assembly? Best to look for a wire that shorted out ( made the popping noise) and repair

...ceiling fan is not working and according to hunter technical support, I need to replace the remote control receiver (part # 8511204000) at a cost of 50.00 plus shipping.is there a way to by-pass the ...

...popped off and right back on. Now the fan/lights wont work check to be sure the breaker in your house panel didn't trip,, turn them off all the way , and back on,, sometimes all or just one will ...

...ceiling fan. One day I turned the wall switch to turn the lights on and the fan. Both of them worked. Five minutes later, I heard a pop and the lights blew out. I reset the breaker. Now the fan only ...