Questions & Answers for: Technics cd repair

...readable surface is a laser. Maybe the unit is just dirty. Call a local repair shop and ask how much to clean it up... I had a CD jukebox with a 600 disc changer cleaned for under $100 not long

cd door not opening its 5 cd changer, not used for a while....cd door stuck not opening it might be a sticky mechanism inside the unit. open it up spray a little WD40 on to the tray mechanism and ...

...CD.Here is a link to give you an idea of repair cost.Ask for the appropriate department,tell them your stereo make and model and that you want a repair estimate for the laser eye.I used to work ...

cd drive and underneath the laser there is a white thing that can fit a flat head screw driver in it turn it a little about 30 degrees left this should resold the problem. mark where it originally was

...resolve the problem, I recommend a CD cleaner. This is a CD that has a small brush attached. It will clean the dust from the laser reader. If this doesn't work, I'd suggest a professional repair

cd player skips Use CD cleaning kit and follow instructions, if that fails! the laser pickup assembly must be replaced, not cost effective to repair.

not recognise CDs. Can this be repaired Model no SL-PJ27 Use a CD cleaning kit and follow instructions, if this fails! the laser pickup assembly would need to be replaced, not cost effective to repair

The door won't stay open when putting in a cd on my Technics SL-PG350 If I am quick about it, I can get a CD into the player, and then it functions fine. But when you open the door/tray it comes ...

panasonic sa pm65md Hello. The CD component is broken... the CD's won't slide in anymore as the mechanism that slides the CD in and out doesn't work. Is this something that can be repaired without too

...a broken drive belt - pretty common on these units. Take the cover off and look at the top of the cd mechanism for the