...connections of the internal buses, with no result. Can it be a software failure? Thanks for your help The problem is a broken CCD sensor. Contact HP and ask whether they would repair it for
happening? any advice? thanks paddy Try to take video or take picture in dark conditions. If video records correctly, then the CCD sensor is broken. Contact HP and ask if they would repair it for free
Question about Photosmart M417 Digital Camera
...CCd sensor. clean the lest it is gor dust on it. Blurred images are caused by several reasons: motion due to camera shake, use of slow shutter speeds and failure of the camera to focus correctly. ...
Question about Photosmart R707 Digital Camera
...reset switch for about 3 seconds. Reinsert the battery and take a picture. If it works in the dark conditions (with flash) and doesn't in the daylight then I would suspect the problem with CCD
Question about LaserJet 2840 All-In-One Printer
...CCD sensor board or a problem with the scanner lamp. Try turning the machine off for five minutes then turn back on. If this does not work you probably would need a technician to check your
...CCD sensor. It can be due to the lens itself. I swap lens from a non-working camera to replace the one with horizontal lines. I found out that I was able to get the camera to work to take great ...
CCD sensor.In both situations,repair is never recommended as buying a new camera would be cost effective as compared to getting this camera repaired. Try to look at previously saved video's or images,
...CCD sensor or bad LCD panel. Try to pull out old videos or images. If you could see them fine, this is faulty CCD sensor unless this indicates faulty LCD panel. There were few recalls in the past for ...
...CCD image sensor or LCD screen go to bad. Read this ans try to test it; it is the device that responsible for capturing the image when the shutter is released and seems to be malfunctioning in dimly ...
...not resolved chk CCD ribbon cable, # replace CCD unit.. CCD unit: NO! Now in proper grammar. The black sensor needs to swing freely. Its the black plastic swing thing that blocks the U shaped
Usually answered in minutes!
230 Questions
146 Questions
127 Questions
112 Questions
96 Questions