CCD board). I would try turning the machine off for 5 minutes and then turning the machine back on. Also make sure the scanner is not locked. If this doesn't work you would have to replace those parts
Question about magicolor 2490MF Laser Printer
...and machin shows 6701 Any one of these: 1. CCD board (CCDB) 2. Exposure lamp (L1) 3. L1 inverter (L1 INVVB) 4. Scanner motor (M2) 5. Overall control board (OACB) I would go with the 3,1,4,5 (IS
error code 6701 in bizhub 361 CCD, Exposure Lamp. inverter board,scanner motor, or their control board, all located under the big Glass Recommend a tech
WITH c-6701 Any one of theses: CCD board (CCDB) Exposure lamp (L1) My Number #1 does the Bright Light under the big glass come on? L1 inverter (L1 INVVB) Scanner motor (M2) Overall control board (OACB
bizhub pro c6501 error code 6702 xcx 1.Failed Overall Control Board (OACB). 2.A communication issue between the CCD and OACB
...Couple Device) that is what looks at the originals and determines how the copies are made. Open close the front door to reset. if it comes back the CCD or the board associated with it mite be
...the exposure lamp and or board, CCD unit (Large Black device under the glass on the right side) and control board for that) worse case the control board for all that is bad get a tech out to look at ...
...do i repair error code C6752 on a bizhub C280? Replaced all boards but no luck This code deals with CCD the device located under the big glass, to the right looking from the front. its what see the ...
...420 error code 6701 how to fix Description AOC abnormality. - AOC counter overflow Causes CCD board (CCDB) Exposure lamp (L1) L1 inverter (L1 INVVB) Scanner motor (M2) Overall control board
...a given period of time after the main power switch or power key is turned ON or the machine recovers from the sleep mode Check: • CCD board (CCDB) • Scanner drive board (SCDB) • DC power supply
Usually answered in minutes!
1,023 Questions
924 Questions
417 Questions
321 Questions
302 Questions