Questions & Answers for: Husqvarna case removal

I inserted a new bobbin the bobbin thread showed through on the other side again. Designer 1 bobbin case tension adjustment: When the bobbin runs out, sometimes it bends the bobbin case tension spring

...housing that supports it. 3. remove the gray plastic piece that is on top of the black bobbin case. 4. remove the black bobbin case from the machine. 5.Look on the side of the bobbin case for a ...

...then bad carbs Remove the handles, then remove four 8MM bolts from the bottom securing the engine case. The entire assembly will then rotate upward, allowing you to remove the two 8MM nuts and ...

how to change the crank case gasket briggs 23hp can i flip the engine and remove the lower case? Yes you need to drain the oil, turn the engine onto its flywheel, remove all the crankcase screws, ...

removing cover to changeing chains Remove the 2 side casing nuts.Slacken off the chain tension screw. (it may be attached to the side casing).Remove bar and chain.Replace chain on the bar and ...

thread broke inside the machine how do I remove the case from my Viking 230 I want to remove the plastic case to get inside the machine to untangle the broken thread. If you do that, you'll void the ...

Price removed casing round bobbin and inner case to clean fluff , now I carnt seem to line up properly although all slots back the needle won't go down properly .....husqvarna Viking E10 ..man

I have a new ***** 455 Rancher and am wondering how I get the spark arrestor screen out of its casing. I removed the screw on the casing and thought the screen would slide right out. Replacing spark ...

...husqvarna chain saw 240 The motor is part of the casing on the saw. The crank shaft mounts into the case. To remove the crank shaft the case itself must be ...

How do I remove the motor from the casing of a husqvarna chain saw 240 model...? On the 240 the case is part of the motor. The crank sets into the casing