Questions & Answers for: Brother case manual

case goes back into the machiens. However some bobbins just load the bobbin flat from the top. The best place to start is with your machine's manual. If you don't have the machine manual, contact your

case I can give you the link to the operation manual: http://welcome.solutions.brother.com/BSC/public/files/dlf/doch000059/se270dug01en.pdf hope it can help you Hi, Please go through the given manuals

...manual feed. Ether the case here its ether or. I would check the manual feeder if there is no paper in there put paper in it the nrun your allighment test then switch it to autofeed. So if its a ...

...case lightly to the left or right before it clicks into place. When you thread the machine always make sure the presser foot lever is up and this will ensure proper tension of the top thread. If you ...

...case the right way, page 12 of your manual should show this. Yout want the bobbin to turn anticlockwise when you pull the thread tail. Then load it into the shuttle using the latch on the bobbin case ...

I pulled the bobbin casing out with the bobbin when I threaded the bobbin. Now, the casing won't go back in correctly. How do I insert it? I pulled the bobbin casing out with the bobbin when I ...

6260 HOW TO PUT BOBBIN CASE IN/ here is a link for a manual --it should have how to put the bobbin case in Instruction Manual Janome 6260

...case. Just tight enough to allow a thread to move under the adjustment part and the case where they touch. Make sure it is seated properly, see your manual for more detailed information about ...

case to replace the bobbin. For this procedure, the pictures in the manual may be clearer than the written description. See pages 14 and 15 (16 and 17 for the PDF) in the manual. Brother currently has

......