Questions & Answers for: Epson TM carriage motor

...to take self test.2.how to take self test and current settings 1. IN THIS PRIENTER I AM FACING CARRIAGE IS GETTING STRUCK. 2. HOW TO TAKE SELF TEST To do the self test, power the printer on ...

...check the belt tension , or any paper parts in inside or check the home position sensor and carriage motor (7.2 ohm or below) and finally apply lubricant , it will work proper.... Thks and

and check the belt tension , or any paper parts in inside or check the home position sensor and carriage motor (7.2 ohm or below) and finally apply lubricant , it will work proper....Thks and regards.

I have a TM u220 printer. I can't get it to auto cut. Any ideas? Is there a code? TM 220a and TM 220b should come with auto cutters You have to unscrew the metal tab under the printer, you will find ...

The cutting bade is getting stuck Either, the blade has a lot of scraps of paper jammed under it, or the blade is slightly bent (usually caused by people forcing the lid open because the blade ...

troubleshoot tm u220 printer my pos printer did't cut automatically.the red led blinks and you need to turn off and on the printer to make the printer set.what's wrong with my printer? CUTTER WIRES ...

me this message. When I power it up there is a lot of noise coming from inside the printer, the ink carriage is moving but not a great deal. Any help advice is appreciated

...came out clear. I then disassembled the print mechanism and cleaned the two rods, the printhead carriage with alcohol. I then took some simple lubricant like MArvel Mystery Oil and lubricated the ...

carriage motor gear used to detect carriage position. 3. Check the carriage motor. If the motor is shorted, replace it along with the main board. 4. Try installing a new main circuit board unit to see