Questions & Answers for: carriage jam belt replacement

jam or other physical problem puts an excessive load on the carriage motor so that the carriage could not operate. This is displayed when the carriage motor could not reach the prescribed speed within

...carriage jam message I was wondering if the adaptor that came with the printer could be causing the message Carriage Jam. Open door. Clear carriage jam, and then press OK to continue? Have try to ...

...carriage. The belt moves with it. Very smooth, no resistance. The belt isn't broken because it transports the carriage now as good as it ever has-- for ink loading and for all the many back and forth ...

...carriage jam error''... It says,''Carriage Jam. Open Door, Clear carriage jam and then press OK to continue.'' We have done this and nothing seems to be jammed. Friends, The encoder strip may also be ...

...jam or some other item in the paper path. However, the most common reason for the error is a worn out carriage belt. Look under the belt to see if there is debris resembling pencil erasure crumbs. If ...

...carriage jam error: Dirty encoder strip. Damaged encoder strip. Encoder strip spring mount out of position so strip is slack. Encoder strip not threaded through the emitter/detector that reads the ...

...screws) Look under the carriage belt to see if there are rubber bits. The belt may be disintegrating and need replacing. Parts available here: ...

...Carriage-Axis shutdown. If this error code appeared but was NOT caused by a paper jam, then try the following: * Too much friction in the Slider Rod. lubricate the Slider Rod. * The Carriage is ...

jam during the warm up cycle the carriage has to reach both ends of the scan platten if for any reason it is not able to achive this it throws the error Paper jam or 86:01 ( both mean the same thhing)

How clear carriage jam on a hp officejet all in one printer? Anyone out there. [email protected] Lubricate the carriage, check if carriage belt is damaged, replace.