...carriage assembly needs replacing. I believe it is called the Carriage PCA (C6487-80006). It is the flexible circuit that contacts the leads on the cartridges and runs to the small PC board in the ...
...carriage assembly lock in place then carefully hold the flex cable at the back This is a very involved repair. Requires removal of all covers and scanner assembly (lid with control panel) to get down ...
...carriage assembly. Turn off the power and remove the cleaners. Push the carriage assembly out and pull/push the belt to move the carriage assembly until you find the bind. If you've recently changed ...
...carriage assembly. it could be a few things. #1. check the belt #2. check the encoder strip is properly in the carriage assembly. #3. problem with head carriage assembly #4 head carriage unit these ...
...carriage assembly is bad. the slot that holds the magenta cartridge is defective.have the carriage assembly and trailing cables replaced. this should resolve your problem. these parts are becoming ...
Question about Officejet 7210 All-In-One InkJet Printer
...assembly from moving along the carriage rail. Turn off the power to the printer and see if you can move the head assembly by hand. Also check that there are no paper jams anywhere in the paper path ...
Question about PIXMA MP600 all-In-One InkJet Printer
carriage assembly canon mp600 printer ink chip carriage assembly canon mp600 printer one chip contact point broke off from the carriage on the large black ink It may well be cheaper to replace the ...
...carriage assembly. Squeeze the two levers beneath the paper tray together to remove the tray. Slide the carriage assembly from the left side of the printer to the middle where you have easy access to ...
Question about HERO 9.1 All-in-One Printer with WiFi
...carriage assembly, i discovered that the belt that drive carriage assembly had a locker that was broken as such, the carriage assembly could not move in the direction as the motor drives the belt ...
Question about DesignJet 500 InkJet Printer
...carriage assembly it's vibrating the carriage aseembly is vibrating Get carriage assembly out from the service station area, remove right door, check right side pulley of carriage belt, weather ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions