Questions & Answers for: card stock paper

...stock type (Label, 1/2-Fold Greeting Card, etc.) and select the name of the new stock entered in Step 7 (above) from the available stock list. NOTE: If the paper stock that is added does not display ...

...card stock,bt plain paper ok. This is a hp laserjet P2015 Thanks Margaret Hi, I m not sure what the specification of the paper type you are using however if you are using card stock than you should ...

...card stock (standard Avery, InkJet, not overly heavy), the alignment screws up completely and the cards print at the very top of the page. I've tried feeding the stock one page at a time; card stock ...

card stock Most of the time when I try to print a sheet of Avery business cards (or sometimes even heavier than normal paper), the stock goes so far and then jams. I click properties and then click on

...card stock paper through. It will print on regular printer paper but will not pull the card stock paper for business cards through. What could be causing this? Usually the stock is too thick to ...

...card stock and The 2600: Will this printer print on heavy card stock and vellum paper? Is the 2025 a better printer for these needs? Looking for quality color and ability to print on different paper ...

...card stock. We have pre-printed card stock that we use for gift certificates and we need to be able to feed the card stock through this printer for printing the name, address and gift certificate ...

Card Stock Paper keeps jamming in the fuser Any time I run card stock paper through the printer, it jams in the fuser and the paper curls or crumbles when it jams. What can be the cause of that and ...

...card stock or to thin card stock Usually there is a flatter route for the paper to take through the printer by dropping down a door at the back or side. Inside a switch (often blue) for paper or card ...

...card stock and it gives me a paper jam. Is there a way to adjust the printer for heavy paper? my printer is a brother MFC-J5910DW. Any suggestions? Your machine should be able to handle a 110gsm card ...