Questions & Answers for: Dodge Neon car turns start

...car start to back fire, hesitate,and chugg. I pull over, turn off the engine and start it up again and the car starts up right away but with the check engine light on as always and then it goes away ...

...car crank over properly and just doesn't want to start ? I have seen this problem in the neon and what it turned out to be was the ignition switch. When you start it, dont turn the key as far as will ...

car as it wants to start but wont, just shuts off. I kept trying to keep the key turned to start it a few times and sometimes where the digital milage is it would say fuse, since it isnt the fuel pump

car turns over well, but she won't fire up. I don't know if this is related, but my car also loses power steering and has for some time. Is there any obvious solutions or things I can check? check the

...turns off and on when it pleases.. sometimes to get the car started after it's been cranking, i pump the brakes about 7times and it starts.. recently(twice), after i got the car started and drove a ...

...car today - it's an automatic - stalled out while at a light and won't start. It turns over and tries to start - all the lights and radio come on like they should but it just won't start. We checked ...

...car sit undisturbed for 10 - 15 minutes, then try to start it. Check the owners manual if you have it. Sometimes, on various cars letting them sit awhile will allow the system to reset itself. On ...

...car would start, but then engine dies after one second prior to turning over. this occurred 5 times; car will no longer turn over. Car not starting or turning over indicates towards multiple ...

...start the car I can drive fine but if i turn off engine the car don't start any more i have power but no signal to starter everything turn on but no crank on starter check and replace fuses and ...

...turns the car on I have the ignition cylinder, however when I put it back in the hole the car turns over but it wont start it only turns the dashboard lights on #help me The contacts and the plate ...