Questions & Answers for: car stereo wont turn cold

...stereo in my car. Everything seemed to work fine but when i was doin testing it just went down. Now i dont get any power or my stereo wont turn on. Then i put back my original stereo but again no ...

...car stereo in a 1996 chevy lumina, I turn on the car and the stereo shows 12:00, per instructions I press the button to reset it (I also tried almost every other button) and the stereo simply blinks ...

wont start lights stereo etc. works but it wont turn over If the engine doesn't turn at all then your starter is shot, but if you hear a noise or an attempt of the starter trying to engage to turn the

car stereo is locked and won't turn on it happened during our first real cold day of winter ... it opened to insert a cd and stays there with cd in there, occasionally switches to closed and has the ...

...wont turn on I left my phone in my car for a couple hours and my phone got too cold. Now its all warmed up but it wont turn on, the screen says behold on the start up screen and samsung on the bottom ...

...stereo with the key in the off position until it turned itself off and when i turned the key back on the unit turned on but wont work other than the staic in the back round from the tuner and says ...

...car battery and now my stereo wont turn on , i just replaced my car battery and got a new one but now my stereo wont turn on .i checked the fuse it was good , i checked the wiring connected to the ...

...stereo car wont start when its cold the steering column ignition cylinder stereo instrument panel has all been replaced was having to wait 10 min. everytime just to get out of theft mode killed alot ...

...car stereo either a single push button that you press to select the audio source (Radio/CD/DVD/Bluetooth) or 4 separate buttons labeled: Radio, DVD, CD, Bluetooth, respectively. Because a sync ...

...car the stereo stays on the old one it would turn off after I opened the door.....did I miss something? The door ajar switch must be defective and this is what signals the delayed exit control module ...