Questions & Answers for: Ford Crown Victoria car stereo troubleshooting

Question about 1993 Crown Victoria

2 Answers

car when i got it and im trying to replace it but i dont know how to uninstall the old one. There is a Small Plastic Frame around the Stereo. Remove this Frame and there should be Slots on Both sides.

Ad

Question about 1994 Crown Victoria

1 Answer

dont know what fuse is for the stereo in a 94 crown victoria 10 or20 amp fuse on block under drivers side panel

Ad

Question about 2001 Crown Victoria

2 Answers

...Car Radio Stereo Wiring Diagram Car Radio Battery Constant 12v+ Wire: Violet/Light Blue Car Radio Accessory Switched 12v+ Wire: Yellow/Black Car Radio Ground Wire: Black/Light Green Car Radio ...

Trying to remove stereo having no luck how does it come out? do u have the special tools? see picture below, any high auto parts store like NAPA has these, they can also show you how to use them.

Question about 1990 LTD Crown Victoria

1 Answer

...car-stereo-wiring-schematic/ I have used this site before, and the wiring guide was accurate for my grand marquis Car Radio Battery Constant 12v+ Wire: Green/Yellow Car Radio Accessory Switched 12v+ ...

Question about 2001 Crown Victoria

1 Answer

wire colors for 2001 crown victoria radio http://www.modifiedlife.com/2001-ford-crown-victoria-car-radio-stereo-wiring-diagram/

...troubleshooting is required.   Click this link below and follow the troubleshooting:------ http://technoanswers.blogspot.in/2012/02/car-starting-issues.html --------- This will help.

...stereo have blown/shorted out? Note that the audio system never stopped working, even after the car stalled... Is the fuel pump coming on? Turn the key to on position and listen by gas tank for a ...

Question about 1997 Crown Victoria

1 Answer

...stereo, heater controls, and light control from the main wiring harness... I'm preparing this car for a demolition derby... Is there security in this car that will disable the pcm from firing the ...

Question about 1998 Crown Victoria

1 Answer

ALARM AND RADIO CHANGED RADIO,NOW ALARM WONT WORK OR THE RADIO,NEW RADIO PLUGS WERE THE SAME AS THE OLD ONES. You need a install kit with an anti theft bypass since the alarm is tied into the factory ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...