Questions & Answers for: car amp light goes rca

...Amp powers up; the Jensen sign is illuminated as well as the power light. THe protect light remains off. IT powers up and remains on but doesnt play. I know its not a stereo wiring problem because I ...

amp. The car is a 2000 BMW 528i. I used speaker level wiring and tapped into the 12 pin plug on the amp. Any suggestions? Thanks, Curt The auto on switch should only be in the on position when the REM

...amp powers on and the light is green and it even gets my subs bumping a little bit, but then i go to turn up lowpass, bassboast and crossover and my amp instantly goes into protection mode. any ...

...Amp: Power Acoustik 1440 Plasma Sphere The protect light only goes on when the RCA wires are hooked up. Only one of them has to touch for the light to turn on. I've checked all of my connections and ...

amp to the car stereo usually these are the blue wire on the harness in the dash. once that is hooked up run the rca cables (reds and whites) plug in to amp and then in to back of cd player. once this

...at a time and see which one gets you the red protect light, then find the short for that speaker/rca wire. if the red light turns on with only the 12volts/remote/ground, then the short is in the

...amp; it dosent work. the red light that says protect is on. first thing check all ground and power wires and make sure ur rca wire make sure it isnt cut in anyway. after that unplug ur sub and unplug ...

...car while driving. That means you can have a head unit drawing 15 amps and a sub amp that will draw 35 to 40 amps before you will need to upgrade your entire charging system. Failure to do this will ...