Strainer Lid for Utilitech 58410-UTL1 & 58411-UTL1 Try: http://www.ebay.com/itm/Strainer-Lid-Cap-and-O-Ring-for-Utilitech-58410-UTL1-58411-UTL1-69010-001-/360399194824
...o-ring Not exactly sure of what you are looking for gut go to: http://www.ebay.com/itm/Strainer-Lid-Cap-and-O-Ring-for-Utilitech-0313509-0313504-69010-001-/360399194824 I think that is what you are ...
Question about 0.33-HP Thermoplastic Submersible Utility Pump PPSU25
motor runs but does not pump water pump will not pump water, but motor is running Is there water over the pump housing? Is intake on the bottom clear of debris? This may sound stupid, but is hose ...
Question about 1/2 HP Convertible Jet Pump 1/2C-JET
...it. The capacitance should be the amount indicated on the cap and not more than 10 percent less. If capacitor is good the pump itself might be frozen. Try running the motor not connected to the
Question about 1-HP Cast Iron Shallow Well Jet Pump PPSWJ100
...there should be a foot valve (check valve) installed. On the top of the pump there is a fill cap. Fill the pump until it is filled to the top. I Replace the fill cap and start the pump. If ...
Usually answered in minutes!
7 Questions