...SCANNING IT WILL NOT SCAN AT ALL- First check if the driver is installed. Then install CapturePerfect and select proper settings. If the background is dark, select 'Auto' else select an appropriate ...
canon dr9080 scannin duplex but front page is all black... and back page is not clear......any ideas? First check if the front side (i.e top) scans properly in the simplex mode. Try different contrast
Faded images canon Dr 7580 Scanned image is faded down the center on some but not all images Clean the glass thoroughly. Try Automatic settings and try various contrast levels in mamual mode. S. Mohan
Question about DR-9080C Path-Through Scanner
Canon DR-2050C scanner. a line is appearing on all scanned documents. The Scanner's rollers and scaning window have been cleaned but problem still occurs. Any idea on a fix? Do the lines appear in the
left edge of scan is blurred or blank I'm experiencing the same issue. Changing the contrast has little effect. Clean Reader units and Shading plates. shading plates are located on opposing read head ...
...scanner and the Canon software is installed.) If you are using the Canon software, you need to set up the destinations for the buttons and have the monitoring software running. Thus start scanning ...
I've cleaned the glass and still have a black line on the image Scan a document in 300 dpi in full width. Check where the line appears in the image. For example if the black line appears at ...
Question about DR-3080CII Path-Through Flatbed Scanner
gray shades Everytime I scan a white sheet of gray shades Everytime I scan a white sheet of paper, i get a gray shade across the entire sheet of paper. How can I remove that gray shade from my ...
Question about DR-2010C Flatbed Scanner
...canon dr-2010c scanner. but when I scan the paper through capture touch 2.0 than scanning very fine but when I scan through capture perfect 3.0 than show black page scanning. Normally it is advisable ...
Question about DR-2010C Flatbed Scanner
...Canon Mf 8380 scan anything handwritten very faint and non legible Whenever I scan anything that is handwritten it comes out sparse and faint. anything typed is fine. Is the handwriting black ink? ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions