...top feed and the tray feed with the same results Your printer is politely asking you to please get a torch, and open the lid of unit and thoroughly check inside all over for a tiny jam of paper or ...
...feeder, if I lay my fingers lightly on top of the paper towards the bottom it will feed in quiet and smoothly. Am I missing a part? It is usually the same with most ADF's if you put in a single
Canon MP530 shows paper jam, when paper is not jammed. First ? diagnose your problem. In my case the first roller which feeds the paper through the ADF (under small black flip up cover on top) was not
Question about PIXMA MP530 All-In-One InkJet Printer
...MP530 ALL IN ONE PRINTER THE PAPER IS GEETTING RIPPED IN THE PRINTER I PULLED OUT THE PAPER THAT GOT JAMMED BUT I DON'T KNOW HOW TO OPEN AND ACCESS THE AREA WHERE THE REMNANTS OF THE RIPPED PAPER ARE ...
Question about PIXMA MP530 All-In-One InkJet Printer
...top, back paper feed. First side printed OK. The first sheet went OK, the second sheet had a bent corner and I hit cancel, the third sheet printed first side and paper retracted. I saw the paper ...
Question about PIXMA MP530 All-In-One InkJet Printer
...feed without jamming from bottom tray, top tray jams every 2 to 3 prints or print with the top corner bent Unless both feeder rollers went bad at the same time, which is unlikely, it must have ...
...top and bootm edges of the paper when using Borderless Printing. Ensure that the paper you are using is compatible with Borderless printing. Refer to the Printer Driver Guide. Hope this helps. PLease ...
Question about PIXMA MP530 All-In-One InkJet Printer
assistance Make sure you have paper in the tray you select, there's a paper tray on the bottom and also in the back on top. You need to press the feed switch to change between top feed and drawer feed
...MP530 because of the Auto document feeder and the scanner. Once you open the top cover to typically change the inks, there is very limited space to get at the purge unit. Open the cover and when the ...
MP530 - paper not feeding. don't see a 'slot' or 'guide' where paper should go The above pictures show how to open and set the Pixma 530 printer and also where to set the papers.The paper tray is in ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions