Questions & Answers for: canon i850 light green flashes

Canon i850 7 orange flashes =Bad printhead???? I've read the knowledge base at the Canon web site and this tells me I probably have a bad printhead. It powers on with green and then does 7 orange ...

...Canon i850, i950, S600 Start with the printer OFF 1. Hold down RESUME and then hold down POWER 2. release RESUME 3. press RESUME twice, then release POWER 4. Let green light blink until printer is ...

Canon i850 will not print. The green light is on but then the orange light flashes several times, then the green comes back on. Nothing I do from the computer seems to affect it in any way, as if they

Canon i850 printer When I turn my printer on it starts with a green light, then it flashes orange 7 times, turn back to green for one flash and keeps repeating. I cannot get it to print anything. When

...Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000 above, 1. Turn off printer 2. Hold down Resume button and press Power button. 3. Keep holding down Power button and ...

...i850 is sending seven (7) flashing orange lights and one green following. I have cleaned the printhead and tried to reset the printer by disconnecting and reconnecting the electric cord. Do you think ...

...Canon i850 I read a comment on a similar problem to reset the printer. Could you please tell me how to do this? 7 orange flashes means the ink absorber is full, you can't reset that without having ...

canon i850 light is green then flashes orange 7 times then goes green and repeats orange flashing. Printer never gets ready This is a very bad error. It means that the printhead needs servicing and ...

...green light. two flashes = out of paper, 3=paper jam, 4=empty ink tank, 6=print head not installed, 7=print head defective, 8=waste ink tank is almost full Hmm Clean the print head, I had 7 orange ...

...Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000 above, 1. Turn off printer 2. Hold down Resume button and press Power button. 3. Keep holding down Power button and ...