...cannon printer no longer responds to any commands. I get 4 yellow blinking lights and then 1 green blinker. Need help with my i550 When I turn it on the light gives a short green flash, short orange, ...
Question about i950 InkJet Photo Printer
cannon i 950. Orange light keeps flashing and it says paper thikness lever position. What should I do? I have switched on and off but no luck. Please can anybdoy help me? A friend of mine had the same
Question about PIXMA MP160 All-In-One InkJet Printer
...Cannon Pixma MP160 printer. on/off light keep blinking and a code 1 stays there. Also message reads that the printer is performing another duty if i try to print. At one time the number 3 and E with ...
Question about Canon i960 Photo Printer
cannon i960 blinks 1 green , 3 yellow etc... Won't print sayas pa Won't print says paper jam but can't find paper bolck Canon i850, i950, S600 Start with the printer OFF 1. Hold down RESUME and then ...
Cannon i80 - message Waste Ink Tank Full Follow this procedure: 1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not ...
...printer is done futzing Select function with RESUME press POWER to execute: presses - light color - function Number of presses - light color - function 0 presses - green - Test print (or exit service ...
Question about PIXMA MP160 All-In-One InkJet Printer
...cannon MP160 only the alarm light comes on (not Blinking) and nothing else works no matter what I do can you help Ok this may do the trick, can only try.Also if you are using the Refillable ink ...
...blinking and lights in green, press the Resume/Cancel button 4 times (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) After ...
cannon s750 does this mean i have to buy a new printer Orange error 5200 Abnormal head Green temperature error The head temperature (output of the diode sensor 8 toggle blinks in the head) is close to
alternate blink green and orange canon ip2770 Ink absorber is full or waste ink pad is full. You need to reset your printer but you have to follow the procedure on how to enter the service mode.
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions