Questions & Answers for: camera ribbon Video Cameras

...camera, (carefully). To install the new screen, plug the ribbon back into the slot and it should be snug, if not there is a lock on it, gently push it back away from the ribbon ( a little finger ...

...camera only to find that the ribbon cable for the menu, zoom, delete, timer etc. is broken. Can any say where I can get a new ribbon or how can I contact Fuji or a Fuji parts store. thanks, Gordon. ...

...RIBBON CABLE ON REPAIR ATTEMPT CAMERA WONT RUN NOW I HAD AN E18 MSG AND TOOK APART MY CAMERA AFTER TRYING NUMEROUS XS TO RESTART THE LENSE WAS STUCK STILL TRIED LIFTING THE FRONT COVER OFF AND A ...

...realigned the ribbon and the camera works wonderfully. Might help with other errors. also a small ribbon attached to the multi function button, may have the same result for other problems. good

...that hold the ribbon cables in place they are hinged and will lift up and the ribbon cable will slide out. Note the large ribbon cable feeds through the camera to the front main board. Hope this ...

...how do I get the ribbon connector to snap closed? hi, i know a source for camera flex cables, you could try to contact them from here for your ribbon cable

...ribbon. Any help with this would be greatly appreciated. Thanks. Are you a trained service technician with the service manual at your fingertips? If not, what made you think you could fix a ...

...camera to fix it. A lose ribbon is not likely because Nikon cameras are well put together. It would require a huge impact to losen the ribbon. The LCD would be broken before the ribbon comes lose. If ...

...camera. The ribbon strip that connects the keypad to the board has failed. This strip has 2 folds made in it when the camera was built. These folds stress the ribbon and eventually break. Replacement ...

...ribbon? Donor camera off ebay would be your cheapest option. But, You will have to make sure ( some how) that the donor camera has a working keypad. This is an old camera now and the keypad ribbon, ...