Questions & Answers for: cambridge azur amp cuts

...Cambridge amp connected it wrongly, or with mismatched components. Since you state that the Amp was very hot,It suggests that the Speakers hooked to the Amp were of a Higher Rating than what the Amp ...

...cambridge audio 640 a cutting out when i play any music at quite high volume it plashes 3 red dots and cuts out, the amp is hot but its not the warning for overheating. I originaly thought it was a ...

...azur 640a amp amp cuts out at random regardless of volume, 'protection' red led flashes and i have to unplug from mains to reset this has been happening ever since i bought it but recently it wont ...

...azur 540a/640a v2.0 amplifier is not working. after turning the amp on a loud buzzing sound came out of the left speaker. then the cap 5 protection system kicked in flasing 3 times. i have tried ...

...AZUR 840A. I bought a year ago. Is this under warrantee? Alternatively, can it be replaced for a reasonable amount or is it a total? Did you take the time to fill out the Warrenty Card? It's VERY ...

...cambridge audio azur 640a amp. Problem I have is only the one speaker is working. Both speakers seem to be ok working off the left speaker terminal. Seems to be problem with output from right speaker ...

Cambridge Azur 640A amp, every time I turn the volume up to over 12 oclock the amp shuts down. Can this be changed? I presume this is a safety mode on the amp. Can you help? Yes, you are right. That's

...cambridge audio azur 650a amplifier. It keeps cutting out with the protection light blinking three times indicating "overvoltage" according to the manual. I'm using it at very low volumes ...

...cambridge audio speakers not work at fool tilt with this amp?! You are overloading your amp. IMO 640A cannot handle heavy loads. Better change the speaker combo and connect something that puts right ...

I have problem with my MARANTZ PM57. When I turn amplifier On after few seconds electromagnetic switch inside cut off power supply.Please help. First thing to check would be to disconnect all of the ...