Questions & Answers for: camber caster angle

...camber or caster adjustment on that model. If the car has been in an accident, chances are something is bent. My experience has been that the shock body and/or the steering knuckle is bent. Parts ...

...5 Cross Camber 0.3 R/Camber 0.3 +/- 0.5 Cross Caster 0.0 +/- 1.3 Caster 2.5 +/- 1.3. Cross SAI 0.0 L/Toe 0.06 +/- 0.1 Total Toe 0.13 +/-0.03 R/Toe 0.06 +/-0.1 SAI 8.0 +/- 0.5 Included Angle 8.5 +/- ...

caster set....0.0 +- 0.7 check....0.0+- 0.7 Camber set 0.4 +- 0.5 check...0.4 +- 1.0 Cross camber set...0.0 +- 0.7 check..0.0 +- 0.7 individual toe set 0.0 +-0.1 cehck..0.0 +- 0.1 total toe set 0.0 +-

Caster angle ...........................................................................................................................................................................................

...Camber, Caster and Toe-in. Camber Camber is the angle of the wheel, measured in degrees, when viewed from the front of the vehicle. If the top of the wheel is leaning out from the center of the car, ...

camber and which one is caster. To adjust the rear camber on these cars you have to have a camber kit. From the angle I am seeing you don't have a camber kit. Also the only way to adjust caster on the

camber is not adjustable. Neither is caster. Those angles are preset by the suspension geometry. However, specifications for them ARE published. Generally, if either of those two parameters are out of

for doing it? the FSM covers that, (factory service manual ) buy one? or alldata.com has it. click front suspension alignment. the word lead has no meaning try caster, camber, toe-in, axle inclination

...caster 0.0 degree tol. 0.75 degree camber -0.8 ± 0.75 degree cross-camber 0.0 degree tol. 0.75 degree (for camber, replace original bolts with camber adjusting bolts) REAR camber -1.2 ± 0.75 degree ...

...caster and camber adjustments are made by rotating the offset cam bolt and the cam in the slotted frame bracket in order to reposition the control arm. Before adjusting the caster and camber angles, ...