Questions & Answers for: camaro intake manifold

...intake hose i have a 95 camaro and when i take off the rubber air intake hose where it connects to the intake manifold there is a trail of oil in the hose and in the opening of the manifold..... what ...

camaro its a v6.. i have all the bolts out but there is like a glue of some sort and the top partr of the engine wont come up so i can get to the heads. please help! If you are referring to the intake

need to prob. for high idle on 2.8 camaro what can cause idle to be high on 2.8 camaro numerous problems cause this, intake manifold vacuum leaks and sticking idle speed control valve are common ...

need to know where the oil pressure sending unit is on a 2000 z28 camaro? its behind the intake manifold, which is actually pretty easy to remove.

no vaccum hose to map sensor for 1984 chevy camaro missing hose? connect sensor to constant intake manifold vacuum. should be a vacuum diagram somewhere under the hood

...intake manifold 95 camaro 3.4 sfi do I just pull enjectors out how? I just put my injectors in on the same car as yours. The fuel rail where the injectors are located has 2 screws on pass side. once ...

...Camaro 5.7 engine, multi port, with new pump and good regulated pressure. Won't start without priming intake. Fire's after waiting a few minutes, won't start. How to know if EGR is problem or maybe ...

...camaro to leave the fuel injectors open with no pulse which in turn floods the car,they all ohm out good my suspicion is something in the intake manifold . when the car dies shortly after a clicking ...

...Camaro 3800 series II automatic. Coolant in oil so entire long block was dealer replaced. Intake manifold was the original and not changed. After 300 miles noticed coolant in the oil (milkshake)and ...

...camaro Intake or exhaust manifold? Intake manifold is gasket is a pretty big job that gets complicated even further with tight working quarters under the hood of a camaro. You have to remove the fuel ...