Questions & Answers for: cam shaft sensor located 2000

cam shaft sensor does any one know where the cam shaft sensor is located on a 2004 Dodge neon 2.0 motor From the Auto Zone web site manual for the 2000-2005 Neon.

cam shaft sensor where is the cam shaft sensor located on a 04 dodge neon with 2.0 eng it should be on the back of the head opposite the drive pulleys and belts. it should have four bolts holding it ...

2000 neon cam sensor location? 2000 dodge neon cranks but wont start, but if i unplug the cam sensor it will run for a second

...cam shaft code stays there all the time it will not erase.What can I do to get this to clear?I put in a new cam shaft position sensor. The car now runs but the service engine stsays on and when I use ...

...cam shaft sensor is unplugged i have check the timing over and over, replaced the cam sensor and crank sensor, replace the wiring harness and check the cam shaft magnet! And i have checked the cam ...

...find the 2 wires that lead to MAF/IAT int plymouth neon 2000 The neon does not have a MAF sensor. The intake air temp sensor is located in the air snorkel between the throttle body and the air

...cam shaft position sensor was melted and the wires were touching.I replaced sensor and connector wires and still no spark.I then disconnected the middle wire on connector and began to get spark but ...

What position should the notch of the cam gear be in on a 2000 Plymouth neon http://dodgeforum.com/forum/2nd-gen-neon/323810-how-to-change-a-camshaft-position-sensor.html

...on the transmission or located on the side of the transmission there are 2 sensor an Imput and an Output speed sensor. For further assistance go to my website. Have an awesome day Debbie. Auto ...

...shaft piston regulator sensor and the crank sensor how can I stare this car Take it to a qualified repair shop, sounds like you have no idea how to diagnose . Can't teach you from here . crank shaft ...