Questions & Answers for: Toyota 4Runner cam sensor

...cam sensor if so where is it? I cannot get this engine to fire. I have checked the fuel, the spark and the air filter. I hope you can shed some light on this situation for me. You should have a ...

wont crank at all replaced fuel pump,coil and igniter,plugs and wires,computer,mass air flow and it did not do nothing what about the cam and crankshaft sensors?

...sensor is located in the same area the mechanic was working in while changeing the timing belt. You should have this checked right away. A faulty cam sensor can also lead to the vehicle not

...cam and crank sensors Does the light come for a short time when the key is turned on? If not, the bulb may be burned out.You should be showing that light because I suspect either the crankshaft or ...

...sure the MAF sensor is working properly. If ok, Check all intake hoses for cracks or leaks as this will cause lean codes. Other issues that may cause this is faulty cam sensor or if timing is

...Cam Sensor Range / PerformancePossible causesDamaged PCM. Damaged CKP sensor. (crankshaft position sensor)Damaged CMP sensor. (camshaft position sensor)Base engine concerns. Wiring Harness ...

...cam pisition sensor PO340 at the end of the cam shaft. if car has DIZZY (a distributor) it's in the base of the Dizzy. which engine, of the many.?????????????? ...

cam pisition sensor i need see where is located at the end of the cam. post engine option, what engine?

...cam shaft sensor, check the wiring and confirm before replacing, if you have code P0011, or P0012 or P0017, this means that the cam variable timing in not working, oil may be too dirty or low oil, ...

...cam drive can make noise and make the sensor go nuts. so we never just throw in this $185 sensors. not ever. FIRST GOOGLE HIT http://www.yotatech.com/f2/knock-sensor-wire-3vz-e-34186/ OR ...