Questions & Answers for: Land Rover cam lock

...lock the nut there.Do this with all the injectors in turn with the injector coinciding with the number on the cam shaft. Hi Shephardfox, Your question is a little ambiguous. The injectors for the TD5 ...

...cam on. also a ct light came on... whats the problem? plz help Ok, you either have an expensive problem, or a very cheap one. And it all depends upon the number of lights on the dash. If you have ABS ...

...i can use to replace my serpentine belt. . . Thanks D.D. I assume your referring to locking up the cam/crank so that it can be done. There are tools available.If you could give me further detail of ...

...cam pulleys the lock tool costs less than five pounds if you have the v6 engine [kv6] you need a very expensive lock kit unless you are quite competant would recomend you dont attempt on kv6 engine ...

i have 03 land rover freelander and the intake cam has broke at the timming gear twice now wondering if there is a common prob with this and a fix it is the v6 and its on the front bank the cams are ...

...spring which I can offer it to you. but if the problem is key turning without opening then it might be the internal Cam lock is broken. offer me more details and I'll help you out solving ur ...

i need to set the cams on a 1998 freelander i have changed the head gasket and messed up the cam timming and need to reset it first off remove belt and cam wheels . install inlet cam wheel on inlet ...

lock washer and nut. I saw a lot of this working for a land rover dealer. If that doesn't fix it, check your fuel pressure at the schrader valve above the coil pack ( against the fire wall at the rear

I waht to change tyming belt for my land rover freelander 2000 but there is not any mark to camshaft geare pls , show me how to fix it, thank you ABU the mark on the 1.8 and 2.5 is on the rear timing ...

...lock both cam sprockets in line together. Make dead sure with use of a ruler, that the lines on both sprockets are definitely lined up. Now move your crankshaft sprocket to the right and line up the ...