Questions & Answers for: Suzuki cam girl

starting troubles i have a 2000 600 suzuki katana that i believe the timing on the cams is set on the exhaust stroke instead of the compression sroke can you tell me how to set the cam timing Did you ...

how much is required in the old girl how much oilis required in the old girl Remove the oil fill cover. Does it have a stem on it? The stem is a dipstick. Just fill the gearbox to the range indicated ...

...turn the crank shaft until the engine is on top dead center compression stroke and the lines on the cam shaft gears are even with the top of the cylinder head. At that point evenly loosen the bolts ...

cam how do i tension the cam I think you mean the cam chain and they have a autotesioner no adjusment necessary if its making alot of noise then its probly time to change it the cam chain I mean

2006 rmz250 When I torgue the cam bearing 2006 rmz250 When I torgue the cam bearing journals on the exhaust cam the cam turns very hard. The intake cam tightens just fine. The previous owner said it ...

...cam shifter out due to jumping out of all gears. This slipping is smooth with no clanging of gears, just feels like I am pulling the clutch lever in. Wave washer on the face of the clutch basket may ...

what is the right valve clearance for a 1979 suzuki gs850 i had to replace the head and cams but the shims are not in the head how do i check the clearance and at what cam position do i check them at ...

What kind of NGK spark plugs does a 1993 gsxr 600 take? I can't find it anywhere. it takes a cr9ek im new to bikes and am a girl my name is crystal i love to work on cars but had to do digging for ...

marking for cam pulley and crank ? gsx7501991 oilcooled make sure cam chain tensioner is released or removed.place engine on top dead center on no 1 cylinder.marks for this will be found on righthand ...

...girl friend dont crank it and bend all the valve, yah. then set crank to TDC mark, #1 firing, not 4. do that next. this prevents you doing what you say. my guess is the question now mutates how to ...