Questions & Answers for: Honda CBR 125 R cable

SPEEDO CABLE BROKEN IN SPEEDO DRIVE HOUSING CBR 125 R 05 THE SPEEDO STOPPED WORKING SO I PURCHASED A CABLE.WHEN I WENT TO CHANGE IT I FOUND THE CABLE IS BROKEN OFF INSIDE THE SPEEDO DRIVE HOUSING.CAN ...

Ad

Question about 2004 CBR 125 R

1 Answer

...paint it and now my fi light gives a code 54 (5 long blinks and 4 shorter ones). i see an unplugged cable on the front left side, could that be it? that would be it. find the recepticle nearby that ...

Ad

Question about 2006 CBR 125 R

1 Answer

speedometer cable My speedometer is not working and I want as much as possible to do a personal fix instead of waiting in line to have it fixed. Is there anyway someone could guide me how to change a ...

Question about 2006 CBR 125 R

1 Answer

failed to start,no power If your battery is fully charged check the negativ cable to the frame. Often corrosion or a loose cable will prevent a proper start. Depending on the model you also want to ...

Question about 2006 CBR 125 R

0 Answer

...are: 1. Spark plugs in bad condition or have an improper gap or are partially fouled. 2. Spark plug cables in bad condition. 3. Battery damaged or nearly discharged, should have 12.5 volts. 4. Check ...

how do i fit a clutch cable to a honda cbr 125? the clutch cable snapped need to fit a new one. how do i do that? The clutch cable is fitted to the lever and the clutch arm on the top of the crank ...

Question about 2005 CBR 125 R

0 Answer

...so than lead acid batteries. 14. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable ...

Question about 2005 CBR 125 R

0 Answer

...so than lead acid batteries. 14. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable ...

...a load test if necessary. 2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable ...

...a load test if necessary. 3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...