Akai Plasma model PDP4294 My image is blurry - it looks like there is a slight "ghost" image offset from the main image by approximately 1 mm to the left. I assume there is a calibration with a ...
...image in the background, and the 4 corner boxes flashing. Switching on and off worked to clear it up for a while but not for long. So, opened it up (lots of screws), replaced the four 100uF 35V ...
...image with horizontal static lines, usually with four boxes in all four corners of the screen, there is a possible fix for this. There are four capacitors on the main board that have been identified ...
Question about LCT4216 42 in. LCD Television
picture is scrambled hook up hdmi cable in picture still goes out. what can i do tv is Replace the capacitors at location numbers C280, C302, C320, C323 - 100UF 35 VOLTS
double image my akai tv hat this problem with double image red double image with some blue and stuff please help If your model number is the PTH5498 you will need to replace both convergence ICs they ...
double image Do i just by 2 convergence ICs that are stk 392-040 to fix my earlier problems with double images below. my akai tv hat this problem with double image red double image with some blue and ...
Question about PTH5498 54" Rear Projection HDTV-Ready Television
red shadows around images on screen, setting convergence doesn't help all images on my tv have a red shadow around them. My husband adjusted the red lense in the back of the tv, and the shadows are ...
Question about LCT4216 42 in. LCD Television
...many people here: the white lines, four colored squares, etc. I replaced the capacitors C280, C302, C320, C323 with new 100UF 35 V capacitors from radio shack (and I also replaced capacitor C336 ...
Question about LCT42Z6TA 42 in. LCD Television
...on the main board where the signal is processed. These caps are as labeled: c280,c323,c302 and c320- replace this one first (it usually fixes the problem) Replace these caps with 100uf ...
picture looks yellow dark yellow, orange color, hard to see. The image settings has changed it may be in sepia.. Just change it in camera setting or image setting into auto or normal ,,
Usually answered in minutes!
255 Questions
269 Questions
227 Questions
221 Questions
201 Questions