...psu SECTION I AGREE Regarding panasonic nv-sv120 power shut down: I replaced C1250 (680 uF/25V) and C1260 (1200 uF/10V) and after that is was working perfaect again. There cannot be any reason pin ...
...problems At the back left corner of the dvd draw on the power supply board there are 2X capacitors C1260 10 volt 1000uf and C1262 10 uf 1000uf .Replace them .Problem solved I replaced the two ...
DMR-ES10 DVD... dead Problem which cap is bad on the board. on mine it looks like c1260 on the power suply board has enlarged That's the one who's broken by me. I replaced this cap. and the one right ...
...my unit in to be fixed for this problem 12/07. He replaced two caps and a resistor(?). Caps were c1260/1261 and the resistor was ic1150. Worked fine until 6/09. Now I opened it and saw c1262 was ...
...supply card. See http://vassfamily.net/projects/DMRE85H/dmre85h.html The capacitors I replaced were C1260 and C1261 slightly different from the one on "vassfamily.net". Everything works now for me... ...
...rated capacitors from Radio Shack. Will need some soldering skills. Look on this site for "solder c1260
Not turn power sw. Not open door. Not display. Bad capacitor on power board C1260
code c1260 steering angle sensor? how can i see dtc cod c1260
nv-hv60 panasonic gone dead After the panasonic vcr nv-hv60, i replaced the capacitor C1260 which was defective. The display comes alive again, but now the VCR does not react when pressing the buttons
...I have a 2010 Hyundai Sonata and it gets 6 different codes. P200A, C1283, C1513, C1102, C1702 and C1260. These codes used to show up and then the check eng light would go out for a while. Then more ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions