Questions & Answers for: all buttons stuck in Watches

...stuck, if so, GENTLY pry it out a bit so it's not touching all the time... GOOD LUCK i cannot set my time or date as well as use any of the buttons, the only time my watch responds to pushing the ...

...stuck in ''military time'' and I've lost the instruction manual. Any ideas how to get it to am/pm mode? advance the hours. The first time you go through the 24 hour cycle, it will be in am pm mode, ...

...buttons is stuck (as if permanently pushed) and the watch will not react to any button until the stuck button is released. Inside the watch there are metal fingers (contact blades) that the buttons ...

...buttons on the right side (top and bottom) may be stuck in. Any suggestions? -Thanks. Your battery may indeed be dead. Watches sometimes sit on store shelves for months and even years before you get ...

buttons of your watch is stuck that's why you cannot use the other buttons of your watch. it has to be opened and check for it, mostly of the button that are stucked with this kind of watch is the

...stuck. if you can open it, just check all the buttons and if you see the stucked button just push it outside, if this solution does not work you have to bring it to watch service center. i hope i had ...

...to bring it to timex watch service center. because they have the tools to open and close it. and tell them to lubricate all the buttons so that they will not stuck again. i hope i had been helped

The day changer is stuck inbetween two days and the day wheel does not respond with pressing of the button at the 10 o'clock position Mine has just done the same today, stuck just before Thursday, ...

stuck button, the one that is used to set the date and time, in the top left corner. Any possible way I can get that unstuck? This is usually caused by dirt around the button sticking it into the hole

I have Citizen Blue angel sky hawk ecodrive JR3090-58L. In the morning watch hands start moving continuously, after about 5 minutes I pressed B button and they stopped with clear displays and only "d"