Questions & Answers for: Maytag all buttons stuck in

control panel on my fridge The control panel seems to be stuck. The water dispenser and light button work fine. The door alarm button is on and digital temperature readings are fine. But can't change ...

...buttons several times each to unstick a stuck panel button. If that does not work the ERC clock control will have to be replaced. F7 Function key shorted or stuck button Replace touch pad or clock ...

I have a maytag MER6772 Gemini Electric Rage it gave the F1-2 code. What must I do to Fix This Problem? Maytag / MAYCOR / Magic Chef / Jennair / Admiral Oven Fault Codes Display Condition Remedy F0 ...

EPIC MFW9700S Front Load Washer: washer stuck on control lock... Washer stuck on control lock Press and Hold down the END CYCLE button for 3-5 seconds. Code will turn off and you can start your ...

model CRE9600CCM Serial 24625851SK. When we turned on the oven, we got an error message "F-5". What does this mean? What do we need to do? Here is a list of codes for Maytag-- Does this help

washer occassionally overflows Intermittent issue such as this could be a stuck pressure switch or a water inlet valve not seating properly. If it's a stuck pressure switch and you feel you are ...

...other buttons as nothing works, just stuck on the number 48. I would try shutting the breaker off for a minute then turning it back on. Most electronics that freeze up can be reset like this. Good ...

my maytag dryer display is stuck on(8.8.)and wont do any thing I tried unplugging it I tried unplugging it and pressing and holding start button and off button This may be from a key that is stuck on ...

Maytag 3000 electric dryer is showing error code cf1, cf2, cf3 you could have a bad control panel,the dryer thinks your pressing the dryness level button in and you're not touching it,you can try ...

...buttons are stuck at the same time. The oven cannot operate when this condition exists. The oven is repaired by replacing the control panel with a functioning one. You may try to tap on the control ...