engine idles fine, stalls soon as its given gas I have a 2004 Yamaha Vstar 1100. Starts and idles fine, but as soon as I twist the accelerator it stalls. Its been sitting over the winter. I drained ...
2000 yamaha vstar 1100 custom. starter problem? 2000 yamaha vstar 1100 custom. battery is good, checked kill switch and ignition, bike is in neutral. When i press the starter button, i hear a ''click'
Question about 2001 V Star 1100 Custom
engine idles fine with high beams on and bogs down with low beams i have a 01 vstar 1100 custom. it wont start with the button, i have to push start it. on top of that, when i get it started the ...
i have a 2000 yamaha vstar 1100 classic that when i bought it had been sitting around a while. Spent $900 to have carbs cleaned and other work. After about a week of riding, the bike would not start, ...
starter is not turning the motor If your battery is working well, You've got problem with either solenoid or starter motor.When you press the starter button, you should hear 'click' sound of solenoid,
the lights come on fine but when i push the start button in just clicks very softly. engine wont turn over at all... Find the starter solenoid and short across the two terminals, if the starter works ...
My bike sat in the garage over the winter and now can't get it to run. It will turn over and start with the choke at full, but when I try to give it some more gas it putters out? Thinking the ...
...work because I just hooked them up to a spare battery. I am getting power to the horn when I depress switch or when I don't. I don't want to just start replacing the switch or relay, if there ...
Question about 1999 V Star 1100 Custom
engine won't turn over and i just charged the battery engine won't turn over and i just charged the battery Check that the sidestand switch and the clutch switch are working. If you get a ...
Question about 2001 V Star 1100 Custom
don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity,
Usually answered in minutes!
48 Questions
44 Questions
31 Questions
26 Questions
22 Questions