Questions & Answers for: HP LaserJet buttons

HP LaserJet 2420dn prints twice whenever i give a print command the printer prints two copies. At times the whole work of one day is reprinted on the second day You may have checked this already, but ...

...to change the date Hi here are the steps to change the date and time 1.Press Menu2. Use the < or > buttons to select System Setup and press the check button.3. Use the < or > buttons to select ...

hp color laser jet printer 3000n hi the printer has diferente languche corean or some thing... how i can restart it Try this. BTW, the Button with the "Check Mark" is the Enter button on this. 1). ...

hp laserjet 3500 transfer kit i changed the kit and must of missed a step because its not recognizing that it has been changed what do i need to do? Hit the check botton on the control panel for the ...

how to reset HP 1320N to factory default For me worked this: - Turn off the printer - Turn on the printer - Push and mantain pushed the button on the back of the printer (near to USB connector) for 30

MY PRINTER IS SMEARING INK ALL OVER THE PAGE Hi Friend, To resolve the smeaing issue: Set the Fuser Mode for the Envelope to High 1 or High 2. Press Select (check mark button), and scroll down to ...

how to get printer ip I don't remember my 2015 printer ip address. how do i get that You can press the MENU button on the Laserjet, on the right hand side of the button to keep to pressing the right ...

...BUTTON 8) Again immediately press and hold CARTRIDGE SELECTION BUTTON 9) Now release the last two buttons once printer intitializing was completed. ...

how do I change IP address settings for my HP Laserjet 4650dn printer Changing the printer's IP address If the TCP/IP address needs to be changed, the HP Jetdirect can be reset to factory defaults

please tell me how to configure ip address in printer 4350 Press Check mark (SELECT button) to open the menus. 2. Use (UP button) or (DOWN button) to scroll to CONFIGURE DEVICE menu, and then press ...