...Button can become stuck on these very easily. If it is stuck, then press it down and it should jump back. Who is better than you? All kidding aside, I programmed forwarding to another office fax ...
...one of the buttons to become stuck and no others will respond. Simply tap each button until that one becomes free and the buttons respond. If this fails the keypad had failed and needs to be
...I too found the "Fax Start" button stuck. What a pain. I was able to manipulate it so it de-pressed, but it was not a real obvious problem. It was only appeared to be slightly pressed on one
button was stuck on the numeric keypad. I would suggest looking over each one to determine if one of them are stuck as with mine. I had this problem. Just like Geoff176 I had a stuck 0 button (why don
Question about MFC 210C All-In-One InkJet Printer
...stuck there 3. Locate the button to open the printer, open it and remove any paper stuck there also. 4. Repeate the above step for all buttons that you can find to access the inside of the printer 5. ...
...stuck there 3. Locate the button to open the printer, open it and remove any paper stuck there also. 4. Repeate the above step for all buttons that you can find to access the inside of the printer 5. ...
Question about MFC-9420CN All-In-One Laser Printer
...stuck there 3. Locate the button to open the printer, open it and remove any paper stuck there also. 4. Repeate the above step for all buttons that you can find to access the inside of the printer 5. ...
...stuck there 3. Locate the button to open the printer, open it and remove any paper stuck there also. 4. Repeate the above step for all buttons that you can find to access the inside of the printer 5. ...
...stuck there 3. Locate the button to open the printer, open it and remove any paper stuck there also. 4. Repeate the above step for all buttons that you can find to access the inside of the printer 5. ...
Question about IntelliFAX 1820C Plain Paper Inkjet Fax
...button is stuck. The neddle position button is stuck. Sometimes I have to unplug machine and let it rest for a while before it will start again. It used to flicker between green and red while machine ...
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions
