...the machine check the tension to see if it's correct check the needles closely to see if there's a burr on the needle eye check the throat plate for burrs check the loopers for ...
thread breakage on Juki TL-2000Qi While quilting on a Grace Quilt Frame the thread is breaking/shredding. Tried new needle etc. Still happening There are a few reasons the top thread may break. - ...
Question about TL-432DE Mechanical Sewing Machine
far. I changed threads, needles , adjusted tension, I am at a loss here. Any suggestions. Check for burrs. Even the tiniest burr can break thread. Check the needle throat plate, the bobbin
...ve put the bobbin in upside down (it's not unspooling correctly) 2. The bobbin case or bobbin has a burr. 3. it's rare but a needle plate with a burr can do this too. if you find burrs.... get some ...
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
why does my needle thread break too much tension on top or a burr on needle. Whenever thread breaks its usually the needle is bad. also check hook with finger for burrs caused by the needle. burrs ...
removal of bobbin burrs I've noticed scratches on the bobbin basket. How to remove them? you can use a very small file and very very gently rubb till the burr is removed or very fine sand paper ...
Question about Disney ULT-2002D
14u32 singer serger has a burr on the bottom mechanism so bobbin won't work The repairman said it was a burr and can't be fixed. I think he didn't want to bother. Does anyone know if this part is ...
Question about 14SH654
14u32 singer serger has a burr on the bottom mechanism so bobbin won't work, so says the repairman. Is this a replaceable part? If so, how much does it cost? The repairman said it was a burr and can't
...plate or in the bobbin area. When a needle deflects, it will sometimes strike somewhere and cause a burr or rough spot. That rough spot will then catch the thread and cause it to break or shred. Wrap ...
What are burrs in a seeing machine Burrs are little nicks that have occurred by needles or other items by manufacturer defect or the item striking the machine causing a nick, sharp dent or edge. If in
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions