Questions & Answers for: Jura Capresso burr

Cannot remove upper burr I have a Capresso Infinity Burr Grinder 560. Took it apart to clean, and reinserted the upper burr with soft collar. Then tried to reinsert the bean container, but it would ...

the upper burr stuck upside down! I just tried out my grinder for the first time and after the first cleaning i accidentally put back the upper burr upside down and now it's stuck and i cannot remove ...

...same question. I just put it back together with the ball bearing above the spring, just below the burr grinder. It works fine like this. Note that this is a coffee grinder, so there is no water (as ...

do the ball bearings in a Capresso Infinity grinder go on top of the springs or between them? I just took mine apart. The ball bearings go on top of the springs.

The machine got clotted and no ground coffee coming out ! clean itso ubcloged it

I accidentally placed the upper burr in upside down. Now it is wedged in and I can't get it out. Any suggestions? I've posted this in a few other places on this site (there are many ways to ask the ...

Hmm, I have Capresso Infinity Burr Grinder #560, and I accidentally placed the upper burr back in upside down. Now it is stuck. I do not see the "black section with a long slot" around the ...

...same problem with too fine a grind when I took mine completely apart to clean (including the lower burr). The solution I finally came around to was to further tighten the star-shaped screw which ...

wont vary grind Adjustment for the grind is no longer adjusting. It makes noise and resists as you turn it from coarse to fine but doesn't appear to change the size of the grounds. take it apart see ...

How do I remove the outer casing of the grinder? There are no screw on the bottom of this grinder. How do I take the casing off to get to the insides? I have a Bodum grinder and the screw was under ...