Questions & Answers for: burning smell eureka vacuum

Question about Altima Upright Vacuum Model 2996AVS Vacuum

2 Answers

Burning smell from Motor, it is not from belt. THE WIRING IS GOING BAD Eureka Altima has a paper filter below the dirt catcher. It clogs quickly and doesn't allow air to flow into the motor. You can ...

Ad

Question about 2961AVZ Bagless Upright Vacuum

1 Answer

Burning smell and not picking up dirt My vaccuum is not picking up anymore. I have washed and cleaned the filters and checked hoses for clogs. When vaccuuming, the unit smells like it's burning even ...

Ad

Question about 2961AVZ Bagless Upright Vacuum

2 Answers

...Burning rubber smell means the brush belt need attention. Make sure the brush is turning freely and replace the belt Eureka 4481 very loud. Already replaced belt. Any suggestions as to what problem ...

Question about Altima Upright Vacuum Model 2996AVS Vacuum

2 Answers

...smell like something is burning. I turn it off and see smoke coming from the back of the vacuum (where the motor is) what is my problem and how do I fix it?? The belt is probably worn and slipping, ...

Question about Capture Upright Vacuum Vacuum

1 Answer

...Burning smell I have an Eureka Capture Vacuum and it starts to give off a burning smell after a minute of use. I cleaned the brush, and the belt seems fine, but the smell still persists. Any advice? ...

Question about Altima Upright Vacuum Model 2996AVS Vacuum

1 Answer

...smell like burning and does not suction at all. I have tried cleaning and unclogging the filter and everything. It's bagless so I don't need a new bag. The problem is that your belt is stretched and ...

Question about 2961AVZ Bagless Upright Vacuum

1 Answer

...burning smell on a vacuum cleaner, this is the motor going bad. There are two distinctive burning smells in fixing vacuum cleaners, the electrical burning smell which is the motor, and a rubber ...

Question about Altima Upright Vacuum Model 2996AVS Vacuum

1 Answer

its a burning smell when i turn my valcumn cleaner on its a burning smell when i turn it on The belt is probably worn. Here is the replacement belt you need: Eureka Altima Belts

...burning rubber smell, the drive belt is usually slipping on the motor due to friction on the brushes. Remove the belt and free all the tangled hair to allow the brushes to rotate very easily and then ...

burning smell and smoke. It's not the belt. While vacuuming, it started to smoke and there was a strong burning smell. I checked roller assembly and the belt (like new) and I cleaned all filters. When

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Anonymous

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...