Questions & Answers for: Rinnai burner half on

...half. The heater starts okay but then the lights start flashing and E:20 shows and the heater stops working. Its very frustrating as this is our only source of heat at the moment. I may not be much ...

...half to 3 more minutes then goes off. About 1 minute later E13 flashes with beeping and then thats it. I've bled the line several times so far and have set the time and temp and tried it in a cold ...

...burner mat comes with a tube of adhesive and it takes about half of it to secure the mat down, a thin even coat is needed with no puddling, use a small one inch chip brush to coat it and brush it all ...

...half of the cabinet has been removed and set off to the side. You will have access to all the inner workings of the heater. Plus, if it hasn't been serviced annually, you find a lot of dust and lint. ...

...hole is too largefor that burner have you had it converted reciently lpg injectors are only half the size hole of natural gas injector, could have a blockage in the injector diverting the gas ...