burn marks, but have considerable experience with the F7 problem. Click on the following link for my solution: http://fp1.centurytel.net/Powerman/Dreaded%20F7%20Problem.pdf I have now shared this with
It makes a bee sound and has a burning smell. The microwave now has a burn mark on the door and just south of the interior bottom that makes up the exterior bottom. What is wrong? ...
my door is showing what looks like burn marks on the insied of the glass. what is that? elvin jobhetc guzman lopez
Question about 30" Self-Cleaning Freestanding Gas Range - White-on-White
...burn marks and stains on opening of door and panel above door. This was a perfectly white oven. It works perfectly fine. how do I prevent the white stove from having burn marks after the cleaning ...
burn marks on the bottom left of the white outside frame, as well as burn marks on the door which was up againt it... about 5 inches apart. Is this a manufacturer defect?? or Time to get a new one? It
...marks on the top of the oven door when using the self cleaning mode. It is a white oven and now it looks bad due to the brown marks. Is there a way to get rid of these marks ? The brown marks are ...
...burn marks. If there are none then you may repair this unit. Open it up and check the many thermal overloads for open circuit. Then check for burned wires and repair any if found. Then replace the ...
Question about Spacemaker JVM1640SJ Microwave Oven
...burn marks on it. It's also possible that the door switch bracket is bent or broken and allows the terminals to short to the oven frame. Check the lamp socket - if it is cracked or burned, it should ...
Question about Spacemaker JVM1640SJ Microwave Oven
...burn marks On top of the door and on the frame? has two burn marks On top of the door and on the frame that door shuts on. The inside of a microwave oven has a special paint on it. If the paint ...
Question about Spacemaker JVM1640SJ Microwave Oven
Burn mark on plastic film of microwave door, can I patch with peel and stick plastic? GE MODEL JVM3670SK06 I would not risk it. Your better finding out why there is a burn mark there. The plastic film
Usually answered in minutes!
924 Questions
608 Questions
343 Questions
293 Questions