Questions & Answers for: Christmas Lights Etc bulb

String of 100 lights first 50 work 2nd 50 does not. Fuses has been replaced. What is wrong? Try checking all lights on that strand. One or more could be loose or a blown bulb. Hope this helps

...lights where only 1/2 of the string lights? What could be the problem? There's a blown bulb.. take a spare globe & pull out one of the lights that is'nt working on the strand and ...

...safely and easily do is separate the sections. For example, a string of 100 lights using 2.5-volt bulbs is comprised of 2 sections of 50 so you can safely cut the string at the midpoint (it will be ...

...lights won't blink christmas lights won't blink Each section of lights needs a special bulb called a 'flasher'. This bulb is usually identified by a red tip. If the flasher bulb is not ...

how wiring diagram for christmas lights work why do they go out just because one bulb quits. All the bulbs in a section of lights are connected in series, meaning one after the other, like links in a ...

...up of two sections of 50 lights each) and the lights of only one section are out, you have a bad bulb (or possibly more than one) that must be located and replaced. If your light string is only a ...

light string has first bulb tagged "do not try to remove". I'm convinced this bulb or what is in the socket is the problem. Any suggestions? With the help of a bulb checker & continuity tester, I've ...

How do I pick a right bulb for Christmas tree and string lights? Some are 2.5V some 3.5V some 5V... Some say 2.5-3.5v. I replaced some burned bulbs with generic 2.5-3.5V bulbs from stores and they are

how to fix Christmas lights Just replace the bad bulb. Finding the bad bulb is a different matter if it is a series string. They sell testers for a few bucks, with a little practice they work good.

Mr Christmas Stepping Santa. What bulb do I need for stepping santa what are the specs for the bulbs. Question edited for clarity. Question moved from Cars and Trucks category. Made in China so ...