Questions & Answers for: buffer motor

...buffer and stopped the motor. when it stopped i noticed a wif of smoke out of the vent of the motor. now i have repaired the cord that was damaged by this and the buffer does not move. what to do? ...

...motor housing buffer protection. Help, I don't want buy a new compressor after this one has served me so well for many years. Thanks Your local hardware store should have one. The model number will ...

Reduced speed smoke smell motors shot

...Motor = 1750 Buffer = 400 to 600 Pulley A = 5.5 Pulley B = 3.0 With the equipment you have, the smaller pulley goes on the motor while the larger pulley goes on the buffer. The end RPM of the wheel ...

...Motor = 1750 Buffer = 400 to 600 Pulley A = 5.5 Pulley B = 3.0 With the equipment you have, the smaller pulley goes on the motor while the larger pulley goes on the buffer. The end RPM of the wheel ...

Hi ! My unit do not turn to its right rpm, erratic power. could be a couple things. UNPLUG tool and remove one handle half and see if it is jammed up with lambswool from the bonnet. It can get under ...

burnisher wont start appears gas is not reaching machine turns over but.... any ideas.new tank first fill pioneer 2100 propane machine wont starts cranks but no start, appears gas not reaching motor. ...

tornado floor buffer need to know how to wire its got 4 wires that go to the motor White =neutral Black or Red both = hot Green = ground www.tornadovac.com

...on a red makita buffer looks like de disc is going to fly of Too much work for the money, buy a new one. If the bearings are shot, you got some hours on it..motor brushes are next and Probly

...buffer? The rectifier is in the top end of the motor. Take the cover off and then the top end plate of the motor. With the bolts removed, you will have to tap and rock the plate to evenly remove it. ...