Questions & Answers for: Dodge Durango bubble tube

...tube line. This ISO bubble flare on the steel line then fits into its mate female end which is the rubber hose connector end. So, easiest way to get rid of the ISO bubble flare and change to American ...

2000 Dodge Durango I have changed the thermostat and I replaced the main top radiator hose with the cap on it and it is still over heating. What could cause this to still be over heating. Have you ...

can't change plug on plug next to firewall, under dipstick resivour. I need to change the last spark plug on 2001 durango. But its under the dipstick resivor tube. does this tube pull out? Help yes ...

leaking radiator fluid and overheating check all hoses and also check to see if the water pump is leaking underneath which is a sign its bad When the car is completely cool,check the electric fan(s) ...

...balence weight or you have bent your rim(rough rocky road,hitting kerb etc) or tyre has devolped a bubble you should be able to visually see bubble on tyre apon

1999 Dakota 5.9 liter V8 dip stick handle broke off leaving the metal stck in the tube! Is the tube pressed in or soldered in place. Is there any danger in driving it?Stuck in the Rain Forest in Costa

How much refrigerant system oil should go into a 1999 Durango 5.9 start the car, and run it, and pour until the air is out of the system, via radiator. Which means, when it quits bubbling, your good ...

...combustion is being forced through holes in the head gasket into the cooling system, causing hot bubbles in the coolant, sniff the bubbles blowing out of the reservoir, does it smell like

where is the orifice tube on a 2001 dodge durango Not positive, but probably inline in the high pressure tubing. For this application, there isn't an orifice tube; Chrysler/Dodge simply didn't build ...

...It has to be burped by reving the motor for about 5 minutes just enough to release the air bubbles but not spill over the coolant. Then after you dont see bubbles someone puts on the