Question about Lift-Off(R) Revolution(R) Turbo Upright Vacuum
...brushes on bottom of vac do not rotate and therefore do not pick up any dirt. Do I need a new belt? The front brush motor will not engage until the power is turned on and the handle is in the down ...
...brushes to not work? I take the 6 brush strip offand turn the rod for the brushes and they turn. It's when I put the 6 rotating brushes back on the stemvac they do not turn. Do you have any ...
Question about F7220900 SteamVac V2 Upright Vacuum
brushes not spinning on a Hoover SteamVac), and use a garden hose that has a spray nozzle on the end, and just spray each and every brush. If you start at the top of each brush, and spray water around
Question about 3522 PowerForce Bagged Upright Vacuum
I have the bissell power force bagged upright vacuum and the brush is not turning, I have replaced the belt but the brush will not move but the metal piece that is hooked to the motor that spins the ...
Beater brush my beater brush will not move check for anything in the brush just bought the vaccum 30 days ago Note: The brush will not rotate when the machine is locked in the upright position, ...
brushes in a generator? Generator replacement brush notice: 1, from the model and material needs and the original brush. 2.It is best to grind the new brush to the Radian size of the old brush. 3. pay
...brushes or loose wire. dissasembled shell and one brush just fell out and I am not sure where it belongs and is more than one brush and if so where is it located There should be a second brush. Look ...
Question about SteamVac F5914-900 SpinScrub Upright Vacuum
brushes not turning, 2 inch piec on one brush in place, the housing is spinning but not turning brushes Hello there! It sounds like you may need to replace your brush block assembly. Try turning that ...
Question about SteamVac F5914-900 SpinScrub Upright Vacuum
Dyson DC25 brush won't spin when touching the floor. If I lift it off the floor it spins, once it touches the floor it stops. Any idea what the problem is? I can think of three things that could be ...
Question about SteamVac F5914-900 SpinScrub Upright Vacuum
...brushes will not come out, scared to pull on springs to hard. Suggestions please! You might have let the brushes go to long and they are worn so far that they came out of the holders. Maybe try ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions